Mechanical Engineering · VCU · May 2027

Julian B. Lewis

I take mechanical and plant projects from calculation to contractor. At a paper mill co-op I designed a safety jig, a water-saving spur line and a boiler stair repair; in CAE design I built a storm-motion stage rig in SolidWorks; on my senior capstone I run the budget and ran the first hardware test.

Featured design · EGMN 420 CAE Design

The Wave-Wraith: a storm-motion stage rig

A servo-actuated, winch-driven platform that rocks a model boat like a ship in a storm, for VCU Drama's production of New World at Richmond's Altria Theater.

SolidWorks rendering of a wooden rowboat mounted on a servo-actuated platform on a wheeled steel frame
Final design, SolidWorks rendering.
±15°pitch
±20°roll, plus free yaw
2 actorscarried safely on board
40 ftof stage depth to traverse
< $10,000design budget

The problem

The show needed a boat that pitches, rolls and yaws like it's caught in a storm, carries at least two actors with harnesses and emergency-stop cords, and travels the full 40-foot depth of the stage.

Concepts I rejected, and why

  • The No-Bull: a mechanical-bull mechanism on rails. It met the motion goals, but the rail wheel assembly made it too complex and costly; a simple caster frame replaced the rails.
  • The Tesseract-Gimbal: nested gimbal forks. The geometry was hard to manufacture, the rig grew taller, and solid or extruded forks added weight that hurt stability.

The final design

A servo-actuated, winch-driven platform on a caster frame: light enough to move across the stage, with controlled motion inside the required range.

Analysis

  • Checked the kinematic range of motion in pitch, roll and yaw (below).
  • Wrote a MATLAB script to find the minimum number of teeth on the pinion gear.
  • Sized a 50:1 compound gearbox driven by a DC electric motor.
SolidWorksMATLABConcept selectionGear design

Project Engineer Co-op · Smurfit Westrock · West Point, VA · Aug to Dec 2025

Paper mill capital and maintenance projects

Five months on the engineering team of a working pulp and paper mill, carrying several projects at once from calculations and drawings through scopes of work and contractors.

Drag chain safety jig

Riveting drag-chain conveyor links took three people, and the one holding the backing hammer stood in the line of fire. I designed, drew, simulated and prototyped a jig that makes it a one-person job using only a torch and a hammer.

Under 25 lbSolidWorks simulationShop drawings~$5,000/yr saved

Wastewater spur line

A clarifier was using well water for its skimmer sprays and sludge dilution. Using head-loss and system-curve calculations, I showed an existing effluent pump had enough head to feed it through a new spur line.

~60,000 gal/day of well waterHydraulic analysisPiping isometrics

Boiler stair landing support

Corroded channels made a recovery boiler's emergency stair unsafe. I designed a W8/W6 beam support structure and wrote the scope of work (hot work and confined space permits, lockout/tagout), and co-managed the project.

Structural steelScope of workCo-project manager

Rooftop air makeup unit rebuild

Managed contractors demolishing and rebuilding the rooftop air makeup unit fan on the Paper Machine No. 1 building, coordinating the crane, conduit removal, and shoring a beam that began to fail mid-job.

Contractor managementField safety

Lockout/tagout training

Built a 25-slide lunch-and-learn and video script on OSHA 29 CFR 1910.147 for mill staff, and ran ISO quality-system and recycling compliance rounds.

OSHA 1910.147ISO rounds

Photos and drawings from inside the mill are not posted here. I'm happy to walk through them in an interview.

Skills

Engineering & design

SolidWorks, ANSYS, AutoCAD LT, GD&T, P&ID, piping isometrics, hydraulic analysis

Projects & plant

Scopes of work, contractor coordination, lockout/tagout, work orders, budgeting and vendor vetting

Programming

MATLAB, Python, Arduino/C++, Excel

Shop

Welding, soldering, 3D printing, laser cutting

Background

  • May 2027B.S. Mechanical Engineering, Virginia Commonwealth University · 3.53 GPA
  • Aug 2026 – nowVCU Senior Capstone, financial and manufacturing lead on a five-person team
  • Aug – Dec 2025Project Engineer Co-op, Smurfit Westrock, West Point, VA
  • May 2020A.S. Mechanical Engineering, Germanna Community College
  • May – Aug 2018Student Researcher, NASA Langley Research Center: ran servohydraulic load frames for tensile and compressive testing